Anti Static Segmented Belts For Panel Industrial / Aluminum Oxide
WEEM premium segmented wide belt is special make and mark 1128. It
make with heavy duty YY weight polyester backing place premium
silicon carbide gain, Special design for heavy duty MDF boards’
surface sanding. With custom sectional belt, WEEM make into belt’s
length up to 3200mm with 2 joints. Best Choice for Surface
Finishing of MDF, Particleboard and Plywood Panels.
WEEM premium segmented wide belt is Special design for heavy duty
MDF boards’ surface sanding. Therefore when we chose the right
backing to sustain cross-direction strength, YY weight waterproof
polyester backing is the best choice. This is a type of cloth
backing provided both stiffness strength and tensile strength, idea
for sectional belt requirement. Anti-static treatment made on
backing to delay or prevent loading problem.
Care selection of gains, only premium silicon carbide is selected.
Silicon carbide is a very hard and crystal structure produces a
fine straight edged grind lines. It is superior for its ability to
penetrate with light cutting pressures. SiC is primarily used for
grinding nonferrous materials such as brass, copper, bronze, and
wood, glass, rubber and plastics. It is also used to finish
polyurethanes, primers, lacquers and sealers. And use closed coated
technique bond on the backing to ensure the grinding and durable
needs. A closed coat product has a higher number of abrasive
cutting points per square inch and results in higher stock removal
rate and longer time before the abrasive wears out. Normally
results in a better finish.
A sectional belt or segmented belt is custom make to your ordered.
For panel industrial, the belt size can be 1950mm x 3200mm or
2650mm x 3200mm etc.
A strong bi-direction tape splice is used. Joint of WEEM premium
MDF segmented belt offer 2 types of joints
Tap on gain line joint: as default.
Tap on butt line joint:
Woodworking /MDF/HDF/OSD/Partial board/Chip board/
YY weight waterproof polyester
1828mm/72” ~ 3300mm/130”
It is made for wide belt sander, such as: Steinemann, Imeas, Sofuma
etc. it offer great performance and durable with heavy duty
grinding and sanding needs.