Pelton Hydro Turbine / Pelton Water Turbine with Cast Machine or
Forge machined Wheel
Horizontal pelton turbine with one /two nozzles
Vertical pelton turbine with four nozzles
80m - 1000m.
500KW - 20000KW
Stainless steel (0Cr13Ni4Mo)
Cast machine/Forge + CNC machine
Governor, Inlet Valve, unit side panel, excitation system
The Pelton turbine is widely used in hydropower station with the
heads from 80-1600m.
Pelton turbine is consisted of runner, turbine case, nozzles
assembly, inlet pipe, deflector etc. The runner is assembled in the
shaft of the generator, torque transmission by ping.
lt utilizes the dynamic power of high pressure water flow to rotate
the runner and force the rotor work, The centre line of the jet is
in the same plane as the runner while rotating.
Pelton turbine has the advantages of compact construction, stable
running and easy operation. Normally, Small pelton turbine always
arranged with horizontal shaft and one or two nozzles, Medium size
and larger Pelton turbines are most often arranged with vertical
shaft, and equip four or six nozzles to obtain more power.
This machine is horizontal shaft Pelton turbine with two nozzles
and single runner. It is consisted of rotator part, main body of
turbine, bearing assembly, nozzles assembly, conduit part,
deflector control mechanism etc. the unit uses two-fulcrum
structure. The runner is assembled in the shaft of the generator,
torque transmission by ping, nozzle pipe is supported by case, and
there is a bend before nozzle pipe, expansion joint and inlet
valve. There is deflector assembled in the nozzle pipe, the needle
server-motor connected with needle stem, deflector and needle is
controlled by the governor separately.
1. Water head: 80m - 1000m
2. Power: 500kw - 20000KW
3. Frequency: 50/ 60hz
4. Generator Output voltage: 400V, 3.3KV, 6.3KV, or 10.5KV AC three
If you are interested in the Pelton turbine, you should send some
key parameters (such as net head, flow discharge, unit number,
frequency, voltage) in inquiry.
We can supply pelton turbine generator above 500KW, supply the
runner with Forge and CNC machine, or runner with cast abrading
machine for your require.
HYDROTU is the complete Chinese hydropower equipment supply,
consulting and engineering design venture in the field of
hydropower equipment. We provide the high quality Chinese
hydropower equipment with advanced technologies and integrated
services to meet the global hydropower markets.
With our Integrated Services concept, we provide you with
customized support from project planning through implementation to
plant commissioning and service. Our principle: Customer’s project
is our project , customer’s success is our success.
HYDROTU covers the services, complete equipment supply, economic
solution of the global hydropower projects and aims to be the best
global supplier of hydropower equipment as well as the best
integrated services provider on the hydropower markets.
The Pelton runner casted entirely by further process of whole
grinding is normal way in history. Nowadays, we could provide
another way with CNC machining on specific area to ensure the
followed grinding met the profile accurately, the quality is
ensured and the cost will be decreased at the same time.
our factory have advanced test system, all parts have ultrasonic
testing, penetration testing, magnetic testing, radiographic
testing, dimension&profile checking by measuring arm, to
guarantee our turbine best quality.